2D
| Model | Plunger stroke (mm) | Jaw stroke (Dia.) (mm) | Chucking Dia. Max. (mm) | Chucking Dia. Min. (mm) | Max. D.B. pull kN (kgf) | Max. clamping force kN (kgf) | Max. speed min-1 (r.p.m.) | I kg‧m 2 | Weight (kg) | Weight (kg) | Max. pressure MPa (kgf/cm2) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2D-06 | 10 | 7.2 | 165 | 22 | 10.0 (1020) |
16.7 (1700) |
3500 | 0.045 | 12 | RK-100 | 1.4(14.3) |
| 2D-08 | 10 | 7.2 | 210 | 28 | 16.7 (1700) |
30.0 (3060) |
3500 | 0.13 | 23 | RK-125 | 1.5(15) |
| 2D-10 | 15 | 10.8 | 254 | 35 | 23.3 (2379) |
40.0 (4079) |
2500 | 0.34 | 43 | RK-125 | 2.1(21.1) |
.jpg)
* Subject to technical changes.
| Model | A | B | C(H6) | D | E | F | G max. | G min. | H | J | K max. | K Min. | L | L1 | M | N | P | Q max. | Q min. | R | S | T | T1 | U | V(h7) | V1 | W | X | Y(H7) | Y1 | Z | Z1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2D-06 | 165 | 85 | 140 | 104.8 | 35 | 36 | 37 | 27 | 32 | M16 | 45 | 35 | M10 | 16 | 31 | 70 | 27 | 57.7 | 54.3 | M4 | 35 | 35 | 20 | 4~M6 | 10 | 2.5 | 52 | 7 | 10 | 6.5 | - | M14 |
| 2D-08 | 210 | 90 | 170 | 133.4 | 45 | 36 | 38 | 28 | 38 | M20 | 56 | 46 | M12 | 15 | 41 | 84 | 31 | 70.8 | 67.2 | M5 | 40 | 45 | 25 | 4~M8 | 16 | 3 | 65 | 10 | 12 | 7.5 | 26 | M12 |
| 2D-10 | 254 | 110 | 220 | 171.4 | 55 | 46 | 47 | 32 | 50 | M24 | 65 | 50 | M16 | 24 | 46 | 100 | 38 | 85 | 79.6 | M6 | 50 | 55 | 30 | 4~M8 | 18 | 3 | 75 | 12 | 15 | 7.5 | 32 | M14 |
| Model | 2D pdf | 2D dwg | 3D step |
|---|---|---|---|
| 2D-06 |  |  |  |
| 2D-08 | | | |
| 2D-10 | | | |
